桥梁施工工艺标准化主要要求
Main requirements of bridge construction technology standardization
关键性要求：
Key requirements:
一是抓好模板准入，对不合格的模板不允许用于生产，确保混凝土外观质量;
The first is to pay attention to the access of formwork, and the unqualified formwork is not allowed to be used in production to ensure the appearance quality of concrete;
二是抓好梁板预制工艺控制，保证砼强度、钢筋保护层厚度，保证桥面铺装层的厚度、平整度;
The second is to control the prefabrication process of beam and slab to ensure the strength of concrete, the thickness of reinforcement protective layer and the thickness and flatness of bridge deck pavement;
三是抓好“首件分析制”，每座桥梁开工后，第一个成品或半成品如桩基、墩柱、梁等完成后应由总监办组织施工单位对质量状况、工艺细节等进行分析并形成正式报告后方可进行批量施工。
The third is to pay attention to the "first article analysis system". After the construction of each bridge, after the completion of the first finished or semi-finished products such as pile foundation, pier column, beam, etc., the chief engineer's office shall organize the construction unit to analyze the quality status and process details, and form a formal report before batch construction can be carried out.